NEWS

Index

Video System 4+1 electronic call |
STUDIO series |
FC42 |
ISO 9001:2000  |
Kit 2 Wire  |
|New DF6000 |

 


Video system 4+1 and audio 1+1 with electronic call

The demand for the installation simplification and the consequent market share of system of reduced number of cables has shown, during the years, a constant growing, that’s the reason why ACI FARFISA INTERCOMS is getting more and more care for systems satisfying this technical need.
According to this matter the 4+1 video system and 1+1 audio system Project range have been redesigned and radically renovated integrating the electronic call. So the audio or video power supplies now generate the chime. Thus the quality of the system has been upgraded, keeping unchanged the functionality, because the alternate current which activated the chime generation into the monitor and the buzzer in the handset is not transmitted any longer on the riser. Moreover the modifications operated follow the concepts already implemented for the Studio range that is only including products with electronic call.
The positive result is that the installations offer better immunity against interference caused by alternate current, potential noises are drastically reduced, with a great benefice for the speech quality from and to the outdoor station.
It is obvious that the partial change of the technology causes the updating of a great part of the products, internal station, system components and video kits as well. Totally unchanged are the audio kits, which remain the same as the known versions of UP and RP series.

  • Compatibility

Even if the basic principles about the addressing and video audio signal transmission are not substantially modified the introduction of the electronic call does not allow any compatibility with previous series. The whole installation must be composed exclusively by the items of new series. Anyway the wiring and, in general, the wire cross sections to be used for a proper installation stay, on the whole, unmodified.

  • Items references updates for the 4+1 video and 1+1 audio systems:

The new items enhancing the range and the unchanged ones according to the new technology are below listed:

Item reference

Description

PT5111E

Monitor system video 4+1 (electronic call)

PT5111EW

Monitor system video 4+1 (electronic call)

WB5111E

Wall bracket for PT5111E and PT5111EW

PT511E

Handset, bicolour 1+1 (electronic call)

PT511EW

Handset, white 1+1 (electronic call)

PRS1181E

Video power supply

MD10ED

Module with integrated door speaker

MD11ED

Module with integrated door speaker, 1 call button

MD12ED

Module with integrated door speaker, 2 call buttons.

PRS210ED

Power supply for audio system

RL37D

Relay unit for note generator

CV01

Video converter from unbalanced to balanced line

PT5111ED

Video kit system 4+1 video, 1 call button and bicolour monitor

PT5111EDW

Kit Video kit system 4+1 video, 1 call button and white monitor

MD41D

Camera module for 4+1 video system

DV2D

Video distributor with 2 outputs

DV4D

Video distributor with 4 outputs

SM50

Audio secret module

241D

2 diodes module for button modules

 

About the DF6000 system the outdoor stations with individual call buttons of MODY series do not change keeping identified with the items MD10D, MD11D and MD12D.

 

 


 

STUDIO Multiple Functions One Solution

The protagonist of the new production, the Studio series is characterised by advanced technology, elegant design and integration of multiple functions. Open to future evolutions, the versatile architecture guarantees a wide selection of services in a single solution. Modularity and flexibility allow intercoms and intercom telephone sets to be used individually or in functional combinations with monitor and video memory mo-dule by interfacing the various wiring systems. The practical modular system makes installation and expansion procedures easy. The accurate, ergonomic design is aesthetically innovative and functional in use: a proposal specially created to satisfy all installation needs and suitable to any available
space. Studio is a reliable product designed for long performance with total security. The intercom telephone set of the STUDIO modular line allows for combining the intercom and video intercom service – both b/w and colour – to the telephone and intercommunication service. When connected to FARTEL PABXs, easy-to-use dedicated buttons allow users to communicate with external door stations,  answer to intercom calls and activate electric household utilities. The interaction with the telephone network is just as simple as with a standard telephone and takes full advantage of the functions delivered by PABXs and the services offered by telephone service providers. The simple, pleasant design has been es-pecially studied for universal integration. The practical modular system facilitates the installation of the va-rious components, with the possibility of fast immediate expansions. Through the integration with electronic-call intercoms, the b/w and colour monitors of the Studio line provide for video intercom stations, that are available in all installations where the transmission of the video signal takes place over coaxial cable or pair. The modularity of the system allows for the elegant, yet practical,  combination of 32-image video memory modules.

Keypad for access control FC42

FC42. Access Control keypad surface mounted with stainless steel front plate and buttons. Two relays for lock opening, access control, etc. Keypad for programming and setting relay enable codes. Keypad deactivation with increasing time intervals (max 25 sec.) in case of wrong combination. Programmable codes up to 8 digits for each relay. Possibility to activate relay 2 with a single button. Programmable timer from 1 to 99 seconds or bistable  operation of relay 1. Two LED’s and sound signals indicating correct or incorrect combination and programming. Relay 1 can be activated by pressing an additional Exit button. Power supply 12V ac/dc. Dimensions: 124 x 90 x 54.

 


 

ISO 9001:2000

Global Quality is a fundamental aspect to establish a brand into an international contest, ACI FARFISA INTERCOMS is aware of this. The most important goal is to guarantee a continuous improvement of its services and consequent organisation integrating number of professionals who are knowledgeable in designing, marketing and technically supporting. Even the continuous search for quality in any of the production stage make us capable to offer reliable products; the assistance to the clients is a focus point also. All these efforts took us to be awarded on September 2001 of ISO 9001:2000, which upgrades the previous ISO 9002, granted to ACI FARFISA in 1998.

We are very proud of this awareness because it is witness and proof of our commitment.

The obtained certification is already updated at the recent 2000 edition and this place us as one of the first Italian companies within the Security and Electrical Material sectors to have achieved


2 Wire Expandible Video-Kit

2-WIRE TECHNOLOGY
Two wires between the video intercom and the external door station are enough for a complete one way video intercom system. The monitor includes the power supply and it is equipped with plug for direct connection to the mains. It can easily extended up
to 4 internal stations by adding a slave Monitor FEVS. Intercommunication facility is also available. Surface mounted white Master video intercom. For the door-opener add the PRS210 transformer. 

KIT 1FEV/4 video intercom kit expandable with flush
mounted aluminium video door station.

KIT 1FEVP/4 video intercom kit expandable with surface mounted plastic video door station.

FEVS monitor slave to extend the number (max. 4 units) of the video stations. It is added in parallel to the master monitor. Intercommunication service is available. 

290/1F rain shelter for 1FEV/4 kit. KIT 1FEV/4

 


 

New 2 wire Digital System DF6000


DF6000 Two Wires for simple installation
The DF6000 digital intercom system features a 2-wire riser (+ 3 wires in video installations) and for highly tlexible solutions. It allows for easy, convenient applications even for large systems, with many of the typical features of digital systems. 

   
Main characteristics:
  • only 2 wires in audio systems (5 in video installations) 
  • up to 8 inputs in parallel
  • digital external push-button panels (with code for door-open function), traditional push-button panels or panels with electronic index 
  • Mody external door stations 
  • two installation modes: "extended*’ (up to 256 internal stations) and "plus" (up to 128 internal stations with call from landing, cut-out of ringer and volume adjustment). The two installation modes can be partially mixed.

 

The DF6000 allows for multiple applications. The system is the ideal solution for small, medium and large installation, as well as for configurations with  main and secondary door stations, whenever quick installation and low costs are the main requirements.


DIGITAL EXTERNAL STATION
TD6100  Digital push-button panel
MD10D  Electric door speaker module
RD4120  Electric index

CONVENTIONAL EXTERNALSTATION
CD6130
Decoder for push-button panels
4244 4 Interface modules
MD10D Electric door speaker module
MD11D Electric door speaker module
MD12D Electric door speaker module
Any push-button module of MODY series can be suitable.

POSTI INTERNI
PT512W Basic intercom
PT522W Plus intercoms
PT515 Swich for PT522W
PT5162W Video intercom
WB5162 Bracket for Video intercom

COMPONENTI DI SISTEMA
6220 Pwer supply
6273 Secondary door station exchanger
MD40D Camera module 
DV2D 2-output floor video distributor
DV4D 4-output floor video distributor

ASK FOR MORE INFORMATION:

info@bcaccesscontrol.co.uk